Safe Build ProHybrid AI that double-checks itself
Dedicated detection models trained on construction imagery run alongside a large AI model that verifies uncertain findings. Serious hazards are confirmed across frames before anyone is alerted.
Self-learning AI for construction safety
Fly your site’s safety into the future.
Safe Build Pro was built to raise the level of safety on your jobsite. Using the cameras already on site, it gives you:
- Instant hazard alerts in the software and on your phone, and on the phone of everyone connected to the site, by WhatsApp, Telegram and email. A dedicated mobile app is coming soon.
- Tracking of every hazard: assigned to the person responsible and followed until it is removed.
- Detailed hazard reports in 3 severity levels, with each hazard detected and marked on the photo and in the report.
- A separate report of recommendations for preventing hazards and accidents.
- Self-analysis backed by AI, across up to 30 cameras on your site.
- Ready for up to 4 drones, autonomous ones included, working in sync at the same time.
Safe Build Pro will make your site safe.
12hazard categories, mapped to OSHA 29 CFR 1926
30cameras and drones on one site, scanned in parallel
3severity levels, each with its own alert path
4drones, autonomous ones included, flying in sync
Why Safe Build Pro
A safety officer on every camera. One that learns.
Many camera analytics stop at “person detected.” Safe Build Pro reads the jobsite the way a safety professional does, explains what it saw, and improves from your team’s judgment.
Every hazard ranked
Critical, moderate or low, so your team acts first on what puts lives at risk. Critical hazards stop the screen and reach the phones you choose.
A fix, not just a finding
Each detection comes with a prevention recommendation, and every scan produces a separate prevention report your foremen can act on.
Trained by your site
Mark a finding right or wrong, say why, and the system turns it into a lesson. False alarms stop repeating, and accuracy climbs where you can see it.
Who it’s for
Site cameras, hired drones, or your own
With the cameras already on site
Connect the cameras on the gates, cranes and facades, and Safe Build Pro watches for hazards around the clock.
Who hire drone flights
Every mapping or survey flight can double as a safety scan. Upload the flight photos and get a hazard report.
One more service, same flight
You already fly over construction sites. With Safe Build Pro, every flight also delivers a hazard report to the contractor.
Alerts and reports
Everyone accountable knows at once
A detected hazard reaches every role you choose the moment it is found, in the software and on their phone. Reports go out automatically at the end of every day.
Owner & developerGeneral contractorSite managerSuperintendentSafety managerEngineers
The moment it happens
A critical hazard stops the screen with a red banner and a voice alert, and goes straight to everyone who needs to know.
WhatsApp, Telegram and email
The alert reaches every role on their phone, with the photo, the location and a recommended fix.
Reports that send themselves
A hazards report and a prevention report at the end of every day, as a PDF and a link that opens on any phone. Nobody has to remember to send them.
Owners and developers are increasingly accountable for safety on their sites. With Safe Build Pro, even those who aren’t on site see what happens there, as it happens.
Start with a trial14 days free, with the cameras already on your site. Judge the results on your own jobsite before you commit.
Join the early-access trialDetection
Twelve categories. Every corner of the site.
The categories your safety program already uses, built on the subparts of OSHA’s construction standard. Each finding comes with its photo, its location and the source that saw it.
Work at height
1926 · MUnprotected slab edges, missing guardrails, roof work without fall arrest.
Scaffolding
1926 · LMissing planks, toe boards or guardrails, unstable bases, overloaded decks.
Electrical
1926 · KExposed or damaged cables, open panels, power tools near water.
Cranes, hoists & machinery
1926 · CCSuspended loads over people, extended jibs, crews inside the swing zone.
Personal protective equipment
1926 · EHard hats, hi-vis vests and harnesses, checked on every worker in frame.
Housekeeping
1926.25Debris on walkways, blocked access routes, materials stacked unsafely.
Vehicle & equipment traffic
1926 · OLoaders, excavators and trucks working close to crews on foot.
Excavations & trenches
1926 · POpen pits without barricades, unshored walls, spoil piled at the edge.
Unprotected openings
1926.501Floor holes, shafts and unglazed facade openings without covers or rails.
Ladders
1926 · XDamaged or unsecured ladders, wrong angle, ladders set at an open edge.
Fire & hot work
1926 · FWelding and grinding near flammables, no fire watch, residual heat after hot work.
Everything else it sees
AI reviewAnything unsafe that fits no category is still reported, with the AI’s explanation.
Category references point to the matching subpart of OSHA 29 CFR Part 1926. Safe Build Pro supports your safety program and does not replace required inspections.
Severity & prevention
Critical first. Always.
The hazard itself is highlighted in its exact shape and colored by severity, so nobody has to guess what the system means.
Critical
A banner stops the screen and alerts go out by messaging app, email and voice. The response is logged when someone taps “Seen, handling it.”
Moderate
Alerted and reported with the photo, so it is fixed before the end of the shift.
Low
In the report and the hazard log, without interrupting anyone’s day.
Prevention
Recommendations for what to change on site so the next accident doesn’t happen, in their own report.
Self-learning
It learns your site. And proves it.
Every site is different: your scaffolding system, your nets, your crane. Safe Build Pro learns from the people who know the site best, and the learning is felt from the first day, not after months of retraining.
Mark it
Real hazard or false alarm, wrong severity, wrong category, or “you missed something here.”
Say why
Pick a ready reason or write one. If the explanation is unclear, the system asks a follow-up question.
Checked against the picture
The AI verifies the explanation against the photo before it trusts it.
Becomes a lesson
A general rule, not tied to one spot or angle, applied to every camera on the site.
Proven on a chart
A weekly learning curve shows how many alerts were right and how the false-alarm rate falls.
Marked ✗ False alarm · Work at height · Level 7 east edge · Reason: “There is a net.”
“A safety net stretched along the slab edge is edge protection.”
Verified against the photoActive on this siteAwaiting approval for all sites
- Instant memory per site. A finding that matches a marked false alarm is not reported again on that site.
- A starter library from OSHA 1926. Ready lessons on what must be reported and what is not a hazard, approved by your safety manager.
- Your own models get better. Every mark becomes training data, and the dedicated detection models are retrained on it.
- Trust built in. Lessons guide the AI but never silence a life-threatening hazard.
Tracking to closure
From “found” to “fixed,” with a name on it
Each hazard keeps one ID across scans and flights. Assign it, follow its progress, and see who fixed what and when. Nothing falls through between inspections.
| ID | Hazard | Assigned to | Status | Last seen |
|---|---|---|---|---|
| HZ-0142 | Open slab edge, no guardrail Level 7 · east edge | Framing foreman | Open | Today 4:52 PM |
| HZ-0137 | Excavation without barricade North gate | Site superintendent | In progress | Today 2:10 PM |
| HZ-0129 | Floor opening without cover Level 4 · shaft B | Concrete crew lead | Fixed | Not seen since fix |
| HZ-0118 | Scaffold missing toe boards South facade | Scaffold contractor | Reopened after fix | Yesterday 9:31 AM |
| HZ-0104 | Cables across the walkway Level 2 · core | Electrical sub | Not seen, check if fixed | 3 days ago |
Open→In progress→Fixed·Reopened if seen again·Full history on every hazard
Example rows. A defects follow-up report lists everything still open, by owner.
Reports
Reports people actually read
Labels never hide the hazard. Each one gets a numbered marker and a legend under the picture, with a close-up for small details.
- Opens on any phone. A tap on a photo opens it full screen.
- PDF for the file. Ready to print, sign and archive.
- Sent for you. By email, WhatsApp or Telegram, and automatically at the end of every day.
- Any date range. One report for a week, a month or the whole project.
1
Open edge of the elevated slab, no guardrail or fall protectionWork at height · Drone 2 · Level 7 east edgePrevention: install guardrails or a safety net along the edge before work continues.
2
Rebar load hoisted directly above workersCranes, hoists & machinery · Crane mast camera
3
Open excavation with no barricadeExcavations & trenches · Loader front camera
4
Materials stacked across the access routeHousekeeping · Fixed camera, main gate
Sample findings from the demo site.
The tour
Seventy-five seconds inside
From launch to report: live detection, the report on desktop and phone, tracking, drone missions and a first look at the mobile app (coming soon). Sound on for the music.
Drones & airspace
Autonomous patrols. Airspace handled.
Fixed cameras see the ground. Drones see the facades, the roof and the top floor. Safe Build Pro plans the flights and checks the sky before you launch.
Airspace tools are a planning aid. They do not replace LAANC authorization or a pre-flight briefing. NOTAMs and TFRs are pasted in by the pilot and checked against the site.
The FAA UAS Facility Map loads by itself for every US site and refreshes daily.
Flights planned for you
Overview, facade, perimeter and hazard-verification flights, exported for DJI Pilot 2 or MAVLink (PX4 / ArduPilot).
Crane-aware routes
Every mission keeps height separation from the tower crane’s jib and hoist rope at any slew angle.
Looks inside the building
Facade openings are placed on the building wall, then a second flight looks inside each one.
Heat you can’t see
Thermal pictures reveal overheated panels and connections, and smoldering heat after hot work.
Mapping flights, lower AI cost
Hundreds of overlapping survey photos are thinned to a set that still covers the site, cutting analysis cost by 70–90%.
Pre-flight check & Part 107 log
Wind, gusts, rain, airspace, docking station and battery in one check, and every launch logged.
Fits your site
Starts with the cameras you already have
Any IP camera
Every camera with a video stream (RTSP), on the gates, the cranes and the facades.
Any drone maker
Live feeds, docking stations for autonomous patrols, and post-flight photo folders analyzed in one batch.
Checked before it counts
One-click system check and a test alert to every channel, so the first real hazard reaches the right phone.
Feet or meters
US units by default, metric with one switch, and your local time zone set automatically.
Enterprise rollout
From one site to your whole portfolio
Built for contractors running many projects at once. Every site learns on its own, and the lessons your safety leadership approves can be shared across all of them.
14-day trial
Sign up, download and connect cameras on your site. Detection and learning start on day one.
Trial summary
When the trial ends you get a summary of what was found, what was fixed and what the software learned about your site.
Rollout
Site by site, with approved lessons carried from the trial to every new site.
FAQ
Questions we hear
Do we need drones?
No. Fixed site cameras are enough to start. Drones add what cameras can’t reach: facades, roofs and the top floors.
How fast does it learn our site?
From the first mark. A false alarm your team marks is applied to that site right away, and the reason behind it becomes a lesson for every camera on the site.
Will lessons ever hide a real danger?
No. Lessons guide the AI, but a life-threatening hazard is always reported.
Does it replace our safety manager?
No. It gives your safety manager eyes on every corner of the site at once, so their time goes into fixing hazards instead of finding them.
Is it a compliance tool?
It supports your safety program and keeps a record of every hazard and fix. It does not replace inspections or the responsibilities that regulation places on your site.
Trial sign-up
Join the early-access trial
The trial opens soon. Fill in your company details and be first in line when it does. The trial: 14 days, free.
Questions? Write to us:
info@safebuild.pro